Intel SR9000MK4U - Manual (Page 111)

Intel ® Server System SR9000MK4U Product Guide 89
Figure 90. Checking the Backplane Cover Latches
4. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
procedure.
— Install the top cover. For instructions, see “Installing the Top Cover” on page 37 .
Installing and Removing the KVM Card
Before beginning these steps, power down your server system and unplug all AC power
cords.
You will need to remove the KVM card to perform the following operations:
• To replace the KVM card
• To remove the PCI card divider
Removing the KVM Card
To perform this procedure, you will first need to remove:
• The top cover. For instructions, see “Removing the Top Cover” on page 36 .
• All installed power supplies. For instructions, see “Removing a Power Supply” on
page 70 .
• The power supply filler panel, if one is installed. For instructions, see “Installing a
Power Supply” on page 68 . Follow step 2 only.
• The power supply box. For instructions, see “Removing the Power Supply Box” on
page 76 .
A
AF001218