Intel SR9000MK4U - Manual (Page 138)

116 Intel ® Server System SR9000MK4U Product Guide
6. While holding the spring clip in place on the processor, align the positioning pins
on processor with the holes in the heat sink.
7. Set the processor in place over the heat sink. See the figure below.
Figure 112. Setting the Processor over the Heat Sink
8. Use a Tork-15 screwdriver to tighten the four screws on the spring clip to secure the
processor to the heat sink. Use a fastening torque of 0.45[N.m] (4.61[kgf.cm]. See
the figure below.
Figure 113. Securing the Processor to the Heat Sink
AF001263
AF001259
A