Intel SR9000MK4U - Manual (Page 135)

Intel ® Server System SR9000MK4U Product Guide 113
5. If necessary, disassemble the processor. For instructions, see “Disassembling a
Processor Assembly” on page 122 .
6. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
procedure.
— If you removed the processor to replace it, see “Installing the Processor” on
page 113 .
— If you are ready to re-assemble your server system, reinstall the following items,
in order:
✧ The air flow guide. For instructions, see
“Installing the Air Flow Guide” on
page 97 .
✧ The PCI card divider. For instructions, see
“Installing the PCI Card Divider”
on page 93 .
✧ The KVM card, if necessary. For instructions, see
“Installing the KVM Card”
on page 90 .
✧ All installed PCI cards. For instructions, see
“Installing a PCI Card” on
page 59 .
✧ The hard drive backplane cover. For instructions, see
“Installing the Hard
Drive Backplane Cover” on page 88 .
✧ The power supply box. For instructions, see
“Installing the Power Supply
Box” on page 80 .
✧ All installed power supplies. For instructions, see
“Installing a Power Supply”
on page 68 .
✧ The power supply filler panel, if necessary. For instructions, see
“Removing a
Power Supply” on page 70 . Follow step 4 only.
✧ The top cover. For instructions, see
“Installing the Top Cover” on page 37 .
Installing the Processor
To perform this procedure, you first need to remove the following items. If you have just
removed a processor, you have already removed these items.
• The top cover. For instructions, see “Removing the Top Cover” on page 36 .
• All installed power supplies. For instructions, see “Removing a Power Supply” on
page 70 .
• The power supply filler panel, if one is installed. For instructions, see “Installing a
Power Supply” on page 68 . Follow step 2 only.
• The power supply box. For instructions, see “Removing the Power Supply Box” on
page 76 .
• Remove the hard drive backplane cover. For instructions, see “Removing the Hard
Drive Backplane Cover” on page 87 .