Intel SR9000MK4U - Manual (Page 76)

54 Intel ® Server System SR9000MK4U Product Guide
4. Push the lever to release the drive from the bracket. See letter “A” in the figure
below.
Figure 44. Removing the Optical Drive from the Bracket
5. If you are not replacing the drive, insert the optical drive filler into the server until it
clicks into place.
Caution: Insert a blank/filler into any unused slot. Uncovered slots may reduce the cooling effect of
the system.
6. Install the front bezel. For instructions, see “Installing the Front Bezel” on page 35 .
A
AF001132