Intel SR9000MK4U - Manual (Page 79)

Intel ® Server System SR9000MK4U Product Guide 57
Removing a Fan
To perform this procedure, you will first need to remove the top cover. The steps below
will direct you to the instructions to remove the top cover at the appropriate location in the
step sequence.
Caution: Before performing the procedures in this chapter, except for when hot-swapping, turn off
the system and disconnect all power plugs.
1. Remove the top cover. For instructions, see “Removing the Top Cover” on page 36 .
2. Locate the fan area in the system. See the following figure.
Figure 47. Locating the Fans
3. Insert your thumb and a finger into the rounded and square holes at the top of the
fan.
4. Lift the fan from the system.
Figure 48. Removing a Fan
AF001133
AF001135