Intel SR9000MK4U - Manual (Page 129)

Intel ® Server System SR9000MK4U Product Guide 107
Installing the Hard Drive Backplane
These steps assume you have removed the air flow guide, as described in “Removing the
Hard Drive Backplane” on page 103 and your system is partially disassembled.
1. Set the hard drive backplane into place in the system. See letter “A” in the figure
below. As you lower the backplane into place, ensure that the 12 hooks in the
chassis insert through the eight slots and four notches in the backplane. See letter
“B” in the figure.
2. Press down on the backplane to engage the 12 chassis hooks with the backplane.
See letter “C” in the figure.
Figure 104. Installing the Hard Drive Backplane
AF001227
C
B
C
A