Muratec MX-2030 - Manual (Page 11)

I-1
1
2
3
4
5
7
6
9
8
11
10
Regulatory information
Customer information
United States of America
This equipment complies with Part 68 of FCC rules and the requirements adopted
by the ACTA. On the rear panel of this equipment is a label that contains, among
other information, a product identifier in the format US:DKUFA02B002C (for
F-560/F-520) or US: DKUFA02B003C (for MFX-2030/MFX-1430). If required, this
number must be provided to the telephone company.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. The REN for this product is part of the product identifier that has the for-
mat US: DKUFA02B002C (for F-560/F-520) or US:DKUFA02B003C (for MFX-2030/
MFX-1430). The digits represented by 02B are the REN without a decimal point.
Your fax is designed for use on standard-device telephone lines. The fax connects to
the telephone line with a standard line called the USOC RJ-11C.
A plug and jack used to connect this equipment to the premises wiring and tele-
phone network must comply with the applicable FCC Part 68 rules and require-
ments adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular
jack that is also compliant. See installation instructions for details.
If the equipment MFX-2030/MFX-1430/F-560/F-520 causes harm to the telephone
network, the telephone company will notify you in advance that temporary dis-
continuance of service may be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with the equipment MFX-2030/MFX-1430/F-560/F-520,
see operating instructions for details. For further repair or warranty information,
please contact Muratec Customer Support Center at 800-347-3296 (from the U.S.
only). If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is
resolved.
Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for infor-
mation.
If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of the MFX-2030/MFX-1430/F-560/F-520 does not disable
your alarm equipment. If you have questions about what will disable alarm equip-
ment, consult your telephone company or a qualified installer.
This equipment is hearing aid compatible.