Muratec MX-2030 - Manual (Page 247)

7-15 C
OPYING
1
2
3
4
5
6
7
8
9
10
11
12
13
C
OPYING
AI
Selecting the paper
6
(1) When selecting the paper, press [Paper].
(2) Select the paper.
(3) Press [Enter].
Setting the magnification
The magnification is automatically set. However you can change the copy magnifi-
cation in the following steps.
7
(1) Press [Ratio] to change the copy magnification.
(2) Select a preset ratio, use [ + ] [ - ] or the numeric keys to set the magnifica-
tion.
• The magnification can be set from 25% to 100% for the ADF, from 25% to
400% for the document glass.
(3) Press [Enter].
8
Press [Enter] twice to return to the standby mode.
9
Set the document and press [Start].
NOTE: Press [Reset] to cancel the combine copy settings.