Muratec MX-2030 - Manual (Page 88)

3-6 F
AXING
Sending a fax using the document glass
1
Set the document on the document glass. (See page 1-25 for details.)
2
Press [FAX] to display the Fax standby mode.
3
Adjust the scanning resolution and contrast, if necessary. (See page 3-2.)
4
Set the various functions, if necessary.
5
Specify the destination.
• Use the numeric keys to dial the number.
– or –
• Specify the destination using the address book. (See page 2-12.)
– or –
• When specifying multiple destinations, use broadcast transmission (See page
3-24.) or call group dialing. (See page 2-14.)
Press [Reset] to cancel the settings.
6
Press [Start].
(If you specify the destination using the address book, no need to press [Start].)
• Pressing [No] during document scanning will start the fax transmission of all
documents when the scan has been completed.
7
When scanning has been completed, set the next document.