Muratec MX-2030 - Manual (Page 140)

3-58 F
AXING
4
Press [Enter].
5
(1) Press [Separator Cassette].
NOTE: Paper sources will only appear on the control panel if they have been installed.
(2) Select the separator page paper source.
(3) Press [Enter].
6
(1) Press [Prt On Separator Pg].
(2) Determine if the separator page will have the first page printed on it or
whether it should be left blank.
If you want the seperator page to be left blank, select [OFF].
If you want to print the first page of the received document on the separator
page, select [ON].
1 2
1 2
1 2
1 2
Separator page separates each received document.
Print on the separator page: [OFF] Print on the separator page: [ON]
Blank
7
Press [Enter] to save the settings.
To return to the standby mode, press [Reset].