Muratec MX-2030 - Manual (Page 181)

5-27 S
CANNING
1
2
3
4
5
7
8
9
10
11
12
13
6
S
C
ANNING
AI
7
Select the desired template.
If the desired template is not shown on the display, press [Page Up] or [Page
Down] to go to the next page.
8
Press [Enter].
9
If you want to edit the subject or the text message, select either [Subject] or
[Mail Text] and edit it. Refer steps 6 to 12 on pages 5-24 to 5-26 for instructions.
10
Select a destination(s).
11
Press [Start].
Changing the default text message
1
Press [Setting] on the control panel.
2
Press [Mail Settings].
3
Press [Subject].
4
Press [ON], then [Enter].
5
Select the desired template, and press [Enter].
6
To return to the standby mode, press [Reset].