Muratec MX-2030 - Manual (Page 374)

14-18 M
AINTENANCE
& T
ROUBLESHOOTING
Message on the display Description / Solution
Enter the sub-address You tried to create an F-code box without entering a sub-address. Sub-address is a
required field.
Error The image transfer failed. Check the printed out “Check Massage” to identify the error.
Feeder In Use There is a manual delayed transmission reserved in the ADF. Wait until the job is
finished, or cancel the delayed transmission by removing the document.
Follow Instruction A Follow the instruction that will be displayed on the screen to clean the charge wire.
Incorrect passcode The entered passcode is wrong. Enter the correct passcode.
Invalid Address Book
Location!
A non-registered address book number is selected. Either choose another number or
manually dial the number.
Invalid characters have
been entered.
You entered invalid characters. To register a Shortcut, insert the PC name between “//”
and “/”. To register a File Name, special characters such as “\”, “/”, “:”, “*”, “?”, “<”, “>”
or “|” cannot be entered. To register NetBIOS characters other than the alphabet and
numbers between 1 to 9.
Invalid I.D.code The F-code box I.D. code you entered is not valid. Try re-entering your F-code box I.D.
code.
Invalid number! You entered a number which is not valid for the current operation.
Invalid Paper Size The selected paper is not suitable for duplex printing. Select other paper source. Select
plain paper in the size of Letter or Legal.
Invalid parameters! You entered an invalid value or pressed [Enter] without entering a value.
– or –
The advanced search failed due to an internal machine error. Check the LDAP server
setting, and try the search again. For more information about LDAP server set up, refer
to the “Network Guide”.
Jam Recover.
Set the document. Press
[Start].
From Page :
[Start] [Cancel]
You selected to continue the job. The machine is instructing you from which page to set
the document. Set the document again from that page that the machine is indicating
you and press [Start]. To cancel and finish the job, press[Cancel].
Lamp error. Call for
service.
The scanner lamp is dim or not operating.
Make repeated copies to help evaporate any internal moisture. If that doesn’t resolve
the problem, contact your Muratec dealer.
LDAP reference execu-
tion error
The advanced search failed due to an internal machine error. Try the search again.
Link Path is required. You tried to register a shortcut without entering [Link]. To register a Folder or FTP
server shortcut, you should enter the [Link].
Load XXX paper Load the paper specified by the machine.
Load paper There is no paper either in the cassette or in the bypass tray. Load paper.
Load paper for reception The paper run out during fax reception. Load paper.
Load paper in the
bypass tray
There is no paper either in the cassette or in the bypass tray. Load paper.
Load paper into the
XXX cassette
There is no paper in the XXX cassette. Load paper in it.
Macro in use You cannot press [Macro Program] while you are registering a Macro.
Mail transmission error The transmission failed. Check the printed out “Check Massage” to identify the error.
Memory full. Printing
will resume when mem.
is free.Press [OnLine]
to stop.
There is not enough memory to store the print job. Wait until some reserved jobs are
finished and the memory becomes free.
Memory overflow Rx Memory has overflowed during the fax reception.
Press [Stop] to return the standby screen.