Muratec MX-2030 - Manual (Page 318)

11-10 R
ESTRICTING USE OF THE MACHINE
Dialing when using the PIN mask
 If you select Mode 1 - use the “star” method
1
Set the document.
2
Press [FAX] to display the Fax standby mode.
3
Specify the destination.
If the destination was specified using the numeric keys, proceed to step 4.
If the destination was specified using the address book, the transmission will
begin.
When you use the address book to specify a destination or multiple destina-
tions, proceed to step 6.
To register an address book for transmission, the PIN needs to be registered in
advance.
4
Enter the phone number, press * (“star”) and enter the PIN number.
The PIN number always follows the fax number.
For example, to dial 67778889 with a PIN of “12345678”, enter 67778889
*12345678:
5
Press [Enter].
6
Press [Start].
 If you select Mode 2 - the display will show the proper procedure
1
Set the document.
2
Press [FAX] to display the Fax standby made.
3
Specify the destination.
If the destination was specified using the numeric keys and/or address book
number, proceed to step 4.
If you specify multiple destinations, proceed to step 4.
If the destination was specified using the address book, proceed to step 5.
4
Press [Start].