Initial setup, Clearing stored settings – Muratec MX-2030 User Manual
Page 42
Advertising
1-14
G
ETTING
S
TARTED
Initial setup
Clearing stored settings
Before using your machine, clear the built-in user data. This insures that the
memory will hold only your settings.
IMPORTANT: After specifying the initial settings, do not clear the memory again without
consulting your Muratec dealer.
To clear the machine’s memory:
1
Press [Setting], [ ], [0], [2].
2
If you want to clear the memory, press [Yes].
If you do not want to clear the memory, press [No].
Advertising