Muratec MX-2030 - Manual (Page 346)

12-14 M
ACHINE
S
ETTINGS
Paper settings
You can customize the paper settings to match your needs.
Accessing the paper settings
1
Press [Setting], [Paper Settings].
2
Set or change the selected items.
For details on each setting, refer to the following table:
3
When you are finished, press [Reset] to return to the standby mode.
The underlined settings are the factory defaults.
Function Description Setting
Cassette XX
Paper
You can register the size of paper used in the cassette. Operation can be simpli-
fied by registering the paper size frequently used when using the cassette.
See “Setting the paper
size” on page 1-30.
Bypass Tray
Paper
You can register the type or size of paper used in the bypass tray.
Operation can be simplified by registering the paper size frequently used when
using the bypass tray.
See “Setting the paper
size” on page 1-30.
Select Print
Cassette
You can set the cassette using range for cassette 1, cassette 2 and bypass tray
respectively.
“Not Use” : This cassette is not used for receiving faxes and copying. You can
use it for PC printing and separate reception page.
“Fax” : Use this cassette when receiving faxes or internet faxes, and print-
ing a list.
“Copy” : Use this cassette when copying.
“Fax&Copy” : Use this cassette when receiving faxes or internet faxes, printing a
list and copying.
NOTE: • Priority of cassette to be used is cassette 1 -> cassette 2 (option) ->
bypass tray.
• When you set “Separate Reception Page” to ON, you cannot select
[Not Use] or [Copy] for the cassette specified in “Separate Reception
Page”.
• 2nd cassette is displayed when installed in the machine.
Not Use
Fax
Copy
Fax&Copy
Separate
Reception Page
Partition each received document by inserting a separator page. See “Separator page” on
page 3-57.
NOTE: The settings for the various functions set under Paper Settings are printed out
in the System Settings List. (See page 13-2.)