Muratec MX-2030 - Manual (Page 359)

14-3 M
AINTENANCE
& T
ROUBLESHOOTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
M
AINTENANCE
&
T
ROUBLESHOO
TING
AI
Cleaning the ADF rollers
If you are having document feeding issues, try this procedure:
1
Turn off the power and disconnect the power cable from the wall outlet.
2
Open the ADF cover.
3
Use a cloth moistened with a rubber roller cleaner to clean the face of the roll-
ers.
Rotate the rollers by hand to clean the entire roller surface.
Cleaning the drum charge wire and the print head
When the following message appears on the display or if you are experiencing poor
print quality, the charge wire needs to be cleaned.
NOTE: Your machine will print approximately 100 pages after this message appears,
after the maximum number of prints has been reached the machine will display
a “Printer Not Usable” message and will not allow any further print jobs to take
place. This will prevent your machine from becoming permanently damaged.