Muratec MX-2030 - Manual (Page 242)

7-10 C
OPYING
Advanced copy functions
The table below lists the advanced functions that can be used in the Copy mode.
To select the advanced copy functions:
1
Press [COPY] to display the Copy standby mode.
2
Press [Others].
3
Press the key you want to select.
Refer to the pages indicated for detailed information.
NOTE: You can assign a function that you frequently use to a soft key for instant
recall. (See pages 10-2 to 10-6.)
Advanced function Descriptions Reference Page
Bypass Use this to set the paper type on the bypass
tray.
p. 1-32
Zoom Use this to set the magnification for zoom copy. p. 7-12
Sort Enable or disable the sort copy. p. 7-13
Combine Enable or disable the combine copy. p. 7-14
Duplex Copy *1 Enable or disable the duplex copy. p. 7-16
Doc.Size Specify the size of the document to be copied. p. 7-27
Card Copy *2 Enable or disable the card copy. p. 7-25
* 1 The duplex printing unit is required. [Duplex Copy] is displayed when the duplex
printing unit is not installed.
* 2 Card Copy is available from document glass only. This function is not available
for F-560/F-520.