Muratec MX-2030 - Manual (Page 384)

14-28 M
AINTENANCE
& T
ROUBLESHOOTING
Copying errors
Symptom Suggested solutions
Cannot make a copy • Make sure that the machine is in copy mode. If not, change to the copy mode
by pressing [COPY].
• Make sure that the document is loaded correctly.
If placing the document on the document glass, the side to be copied should
be face down. If placing the document in the ADF, the side to be copied should
be face up.
Copy quality is poor See “Print quality problems,” on page 14-29.
PC printing errors *
Symptom Suggested solutions
Cannot print from your
computer
• The USB cable is not connected properly. (When using as a local printer)
Check the cable connection.
• Check that the network cable is connected properly. (When using as a net-
work printer)
• Check that the network setting is made up properly.(When using as a net-
work printer)
• The port setting is incorrect.
Check the printer port setting in your computer.
• The applicable printer driver may not be installed properly.
Reinstall the printer driver.
Printing is too slow • Computer may not have enough memory.
Install more RAM in your computer.
• The print job is large or complex.
The machine takes a lot of times when printing a large print jobs. Please wait
until the machine finishes the job.
Print quality is poor See “Print quality problems,” on page 14-29.
The printing option does not
effect for the printouts.
Some software applications will overwrite the option set on the printer property page.
Choose your printing options from the application.
* In order to use your machine as a local or network printer you should have the
applicable print driver installed from CD supplied with your machine.