Muratec MX-2030 - Manual (Page 336)

12-4 M
ACHINE
S
ETTINGS
Fax settings
You can customize the fax settings to match your needs.
This section describes [Default Settings] and [Other Settings].
For details on other items, see below.
• Program One-Touch (See page 10-14.)
• Fax Forward (See page 3-51.)
• Cover Page (See page 3-32.)
• Batch Tx Box (See page 3-35.)
• F-Code Box (See page 10-21.)
Accessing the default fax settings
1
Press [Setting], [Fax Settings].
2
Press [Default Settings].
3
Set or change the selected items.
For details on each setting, refer to the following table:
4
When you are finished, press [Reset] to return to the standby mode.