Muratec MX-2030 - Manual (Page 80)

2-20 U
SING THE
A
DDRESS
B
OOK
If the call fails
If the call fails, the next steps will depend on the type of call it was (fax or phone).
If it was a fax call…
…Your machine will automatically redial the number. It will keep trying until one
of the following occurs:
• It successfully reaches the other number.
• The maximum redial attempts has been reached.
If it was a regular phone call…
…You will have to redial manually:
1
Lift the handset.
2
Press [Redial].
3
Your machine can remember the last 10 dialed numbers.
Select the number you want to call.
4
Press [Start].
How to receive a phone call
1
Lift the handset when the machine rings.
NOTE: You can receive a call with the machine’s handset even if the power has been
turned OFF.
2
Answer the phone.
Adjusting the optional handset volume
The small switches on the side of your machine’s handset adjusts the ringer and
receiver volume.
• Ringer Volume Control ....... Adjust the ringer volume to one of three settings
: High, Medium or Low.
• Receiver Volume Control .... If it is hard to hear the remote person’s voice, adjust
the receiver volume to one of three settings
: High, Medium, or Low.
Receiver Volume Ringer Volume