Muratec MX-2030 - Manual (Page 111)

3-29 F
AXING
1
2
3
5
6
7
8
9
10
11
4
F
AXING
13
AI
12
6
Specify the destination.
• Use the numeric keys to dial the number.
– or –
• Enter the e-mail address manually. (See page 4-2.)
– or –
• Specify the destination using the address book. (See page 2-12.)
– or –
• When specifying multiple destinations, use broadcast transmission (See
page3-24.) or call group dialing. (See page 2-14.)
If you specify the destination using the address book, proceed to step 8.
If you specify it by another method, proceed to step 7.
7
Press [Start].
8
The Copy standby mode will be displayed.
NOTE: After the Copy standby mode displays, you cannot switch to the Fax standby
mode (by pressing [FAX]).
9
Perform copy setting adjustments as needed.
• Press [Stop] to cancel Fax&Copy.
10
Press [Start].