Muratec MX-2030 - Manual (Page 297)

10-29 S
PECIAL FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
A
S
PECIAL
FEA
TURES
 Setting deletion of documents after transmission
(1) Press [Prev] or [Next], then press [Erase Tx Doc].
• When Erase Tx Doc has been set to [ON], the machine erases the document
from the box as soon as it sends it.
(2) Select either [ON] or [OFF], then press [Enter].
 Entering an I.D. code
(1) Press [I.D.Code].
• You do not always need to register the I.D. code. Once you register it, how-
ever, entering the I.D. code is required in the following cases.
• When editing the box settings
• When storing documents in the box
• When printing the document stored in the box
• Once entered, the I.D. code cannot be viewed. Be sure to remember this code.
• To release the I.D. code, first enter the current registered I.D. code and then
enter “0000”.
(2) Enter the I.D. code (4 digits) using the numeric keys, then press [Enter].
• If you enter an incorrect character, press [Clear] to delete it and enter the
correct character.
9
To register another F-code box, press [Enter], then repeat from step 2 of “Regis-
tering or editing an F-code box” on page 10-22.
Press [Reset] to return to the standby mode.