Muratec MX-2030 - Manual (Page 119)

3-37 F
AXING
1
2
3
5
6
7
8
9
10
11
4
F
AXING
13
AI
12
9
A list of the entered information is displayed.
10
To register another batch transmission box, press [Enter], then repeat from
step 3.
NOTE: The contents (settings) for batch transmission boxes that contain any docu-
ments cannot be changed.
To edit the settings of a batch transmission box you have regis-
tered....
Select the box you want to edit, and then edit the contents by overwriting or delet-
ing the existing information in each step.
NOTE: To print a list of batch boxes, press [Setting], [List], [Other Lists], [Batch Tx
Box], then [Yes]. (See page 13-3.)
Storing a document for batch transmission
Your machine can store up to 40 documents (each document can include one page
or many pages). Once the batch documents are transmitted, they are automatically
erased from the batch box.
NOTE: During transmission, a batch number for each document in the specified batch
transmission box will be displayed. We recommend you should make a record
of these batch numbers, which will control the documents and are required for
reviewing and deleting documents.
To store a document in a batch box for batch transmission:
1
Set the document.
2
Press [FAX] to display the Fax standby mode.
3
Press [Others].
4
Press [Batch Tx].
NOTE: You can assign [Batch Tx] to the soft key. See “Soft keys” on page 10-2.
5
Select the batch transmission box.