Muratec MX-2030 - Manual (Page 164)

5-10 S
CANNING
To enter symbols, press [Symbol].
To delete a character, press [ ] [ ] to move the cursor to the character you
want to delete and press [Delete].
For more information on entering characters, refer to pages 1-10 to 1-13 “Enter-
ing characters”.
There are several other ways in which to enter an e-mail address:
• Select an Address Book entry (See page 5-11 to 5-15)
• LDAP directory search (See pages 5-15 to 5-19)
• E-mail history (See pages 5-21 to 5-22)
• Re-mail (See page 5-22)
If you select a destination from the Address Book, the machine will begin scan-
ning as soon as the destination is selected. Otherwise proceed to step 8.
If you have selected multiple destinations and would like to review them, see
page 5-23. Otherwise proceed to step 8.
8
Press [Start].
Registering the entered e-mail address to the address book
If you entered an e-mail address and wish to register it into your machine-side
address book, please follow these steps:
1
After you have entered the e-mail address, press [Register].
2
Select an address book entry number using [ ] [ ] or the numeric keys. You
cannot select a number that has been registered.
3
Press [Yes].