Muratec MX-2030 - Manual (Page 381)

14-25 M
AINTENANCE
& T
ROUBLESHOOTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
M
AINTENANCE
&
T
ROUBLESHOO
TING
AI
T.3.1 The page counter in your fax machine detected a document feeder error
during transmission. Carefully reset the document into the feeder and
re-try the call.
T.4.1 The telephone line disconnected during transmission because of exces-
sive modem errors or because the remote unit ran out of paper. Try the
call again.
T.4.2 After transmission began, poor line conditions developed. Try the call
again.
T.4.4 Poor line conditions prevented transmission. Try the call again.
T.5.1, ECM transmission failed (perhaps due to line noise). Conditions can
T.5.2, change rapidly, so try the call again later.
T.5.3
T.8.1 A compatibility error occurred.
T.8.10 Line noise or other problems prevented line probing.
T.8.11 The remote fax machine didn’t complete the equalizer training phase.