Muratec MX-2030 - Manual (Page 113)

3-31 F
AXING
1
2
3
5
6
7
8
9
10
11
4
F
AXING
13
AI
12
Sending faxes with TTI information attached
1
Press [FAX] to display to the Fax standby mode.
2
Press [Others].
3
Press [TTI].
• [ON] and [OFF] toggle every time you press [TTI].
Set it to [ON] when you send a fax with TTI information.
Set it to [OFF] when you send a fax without TTI information.
NOTE: • You can assign [TTI] to the soft key. See “Soft keys” on page 10-2.
• You can change the default setting for [TTI]. See “Accessing the default set-
tings” on page 12-4.
4
Press [Enter].
5
Specify the destination.
• Use the numeric keys to dial the number.
– or –
• Enter the e-mail address manually. (See page 4-2.)
– or –
• Specify the destination using the address book. (See page 2-12.)
– or –
• When specifying multiple destinations, use broadcast transmission (See
page3-24.) or call group dialing. (See page 2-14.)
If you specify the destination using the address book, the transmission will
begin.
If you specify it by another method, proceed to step 6.
6
Press [Start].