Muratec MX-2030 - Manual (Page 284)

10-16 S
PECIAL FEATURES
8
When you finished the registrastion, press [Enter].
To return to the standby mode, press [Reset].
Polling reception
6
Press [ON].
7
Press [Enter] to return to the display in step 5.
• If performing a delayed transmission, press [Delayed Tx] and proceed to step
6 of “Delayed transmissions”. (See page 10-15.)
8
Press [Enter] to complete the entry.
9
Press [Enter] again to finish the registration.
To return to the standby mode, press [Reset].