Muratec MX-2030 - Manual (Page 153)

4-13 I
NTERNET
F
AX FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
I NTERNET
F
AX
FUNCTIONS
Specifying the attachment file format
• When sending to a PC, the scanned document will be sent as e-mail attachment
file.
• Select the attachment format from the following: [TIFF-S], [TIFF] or [PDF].
• [TIFF-S] ..... This form is for ITU-T T.37 simple mode. The scanned document is
converted into A4 size at 200 dpi. Select TIFF-S when the remote
Internet fax machine cannot receive a TIFF.
• [TIFF] ......... This form is for ITU-T T.37 full mode. The scanned document is
transmitted in its original scanned parameter. TIFF file format is the
approved standard for Internet Faxing.
• [PDF] ..........PDF is only available when sending to a PC.
NOTE: You can change the default setting for file format. See “Mail Settings” on page
12-9.
1
Set the document.
2
Press [FAX] to display the Fax standby mode.
3
Press [Others], [Prev] or [Next], [FileFormat].
4
(1) Select the file format.
NOTE: Color scanning is not compatible with Internet faxing. For details on color scan-
ning, see “Scan to e-mail” on page 5-9.
(2) Press [Enter] twice.