Muratec MX-2030 - Manual (Page 186)

5-32 S
CANNING
5
To Enter the Shortcut name, press [Shortcut Name].
6
Enter a shortcut name, then press [Enter].
The name can contain up to 24 characters. If you do not register a shortcut
name, the folder link will be displayed on the shortcut key. When the link is too
long to be displayed on the key, it will be omitted at the center with “.” and only
the beginning and ending of the link will be displayed.
7
Press [Enter].
• To finish without registering the shortcut, press [Cancel].
• To return to the screen in step 4, press [Back].
8
To return to the standby mode, press [Reset].
To edit or delete the shortcut information, see “Resitering or editing a folder
shortcut” on pages 5-35 to 5-41.