Muratec MX-2030 - Manual (Page 63)

2-3 U
SING THE
A
DDRESS
B
OOK
1
2
3
4
5
6
7
8
9
10
11
12
U
SING
THE
A
DDRESS
B
OOK
13
AI
[Index]
• [Symbol] ................. When you press this key, only the destination names starting
with a symbol or number are displayed.
• [Group] ................... Lists the registered group names.
• [ABC] to [WXYZ] ... When you press one of these keys, only the destination names
starting with the selected alpha characters will be displayed.
Special dialing characters
You can enter special dialing characters when registering the address book. The
chart below briefly describes each of these characters.
Character Description
/P
Each pause lasts two seconds.
If you must wait for another dial tone or signal at any point in the dial-
ing sequence, enter a pause.
(You can change the pause length. See page 12-6.)
– Makes long numbers easier to be read.
/T
Switches from pulse-dialing to tone-dialing.
No need to use this character when using a tone line.
/N
Enters a “Dial prefix code” to access the alternative telephone network.
“/N” must be entered before the first of number.