Muratec MX-2030 - Manual (Page 326)

11-18 R
ESTRICTING USE OF THE MACHINE
Making Copies
1
Set the document (See page 1-25).
2
Press [COPY] to display the Copy standby mode.
3
Use [ ] [ ] or the numeric keys to enter the department code.
If you press [Back], the department code entry display will disappear. Press
[Start] to display it again.
4
Press [Enter].
5
Press [Start].
If you continue to make copies, you do not need to enter the department code.
If you select [Reset] and return to the standby mode, you will be asked to enter
the department code again. If the machine is shared by multiple departments,
select [Reset] after you have completed your job.