Muratec MX-2030 - Manual (Page 112)

3-30 F
AXING
Sending faxes with TTI information attached
The default setting is “TTI 1”.
Every fax and Internet fax page you send arrives at the receiving machine with a
single line of text at the top of the page. This text lists your name, fax number, date
& time of transmission and page number as shown below.
THE SLEREXE COMPANY LIMITED
SAPORS LANE - BOOLE - DORSET - BH25 8ER
TELEPHONE BOOLE (94513) 51617 - TELEX 123456
Your name Fax: +1-123-456-7890 MAY 5 2005 02:15pm P 001/001
TTI information
Date and time
of transmission Page number Your fax number
You can select the name
either TTI 1, TTI 2 or TTI 3
You can select the three types of TTI (your name) stored in the “Specifying the
initial settings” (See pages 1-16 to 1-22) for each transmission. Also, you can tell the
machine whether or not to send the TTI information (See page 3-31).
IMPORTANT: In some countries you are required by law to indicate your name and fax num-
ber on every fax you send.
Selecting TTI
NOTE: Register the TTI in advance. For details on registering the TTI, see page 1-20.
1
Press [FAX] to display the Fax standby mode.
2
Press [Others], [TTI Select].
3
(1) Select the TTI.
• “TTI 1: (your entered name)” — The machine will send TTI 1.
• “TTI 2: (your entered name)” — The machine will send TTI 2.
• “TTI 3: (your entered name)” — The machine will send TTI 3.
(2) Press [Enter] to save the setting.
NOTE: You can assign [TTI Select] to the soft key. See “Soft keys” on page 10-2.