Muratec MX-2030 - Manual (Page 170)

5-16 S
CANNING
4
Use the QWERTY keypad or numeric keys to enter criteria. This should contain
the contact name, part of the contact name or part of the e-mail address.
5
Press [Execute].
6
Every name and e-mail address including the criteria will be displayed. If there
are no results, “Hit:0000” will be displayed.
Press [Page Up] and [Page Down] to search the results.
If the address displayed is from the LDAP server, it will have an next to it.
Select this button to view the contact information and/or register the contact
into your address book. Press [Close] to close the window.
7
If your search yields too many contacts, select [Narrow List] to further narrow
your search.
8
If you want to start a new search, press [New Search] and search again. Refer
to steps 4 to 6 how to search .
9
Continue searching until you find your desired contact(s). If you press [Back] on
the “Simple Search” screen you will return to the “Search Results” screen.
• Press [Cancel] to return to the standby screen.
10
Select the desired destination(s).
NOTE: If you cannot find your desired contact(s), please confirm that the search
criteria was entered correctly. If this does not solve the problem, contact your
network administrator.