Muratec MX-2030 - Manual (Page 354)

13-8 R
EPORT
& L
ISTS
Transmission confirmation report
Setting the transmission confirmation report
Your machine can print a transmit confirmation report (TCR) after sending a fax or
internet fax to any Group 3 fax machine. The TCR lists the following information for
each communication:
• Date and time of the TCR’s printout • Destination to send (fax or internet fax)
• Resolution mode
• Starting date and time
• Number of pages • Sending results (of fax/internet fax)
• Any special operations — For example, “BrdCast” will appear when you per-
form a broadcast transmission.
• Sample of the document — An reduced image of the first page of the docu-
ment will appear.
To activate the transmission confirmation report:
1
Press [Setting], [Fax Settings], [Default Settings], [Tx Report].
2
When you want to set the transmission confirmation report, set it to [ON].
[ON] and [OFF] toggle every time you press [Tx Report].
NOTE: • When you want to temporarily change the transmission confirmation report
setting, perform the following procedure:
After the transmission has been completed the Tx Report setting will return
to the default setting.
1 Press [FAX], [Others].
2 Press [Tx Report] to change the setting.
[ON] and [OFF] toggle every time you press [Tx Report].
3 Press [Enter].
• You can assign [Tx Report] to the soft key. See “Soft keys” on page 10-2.