GE Industrial Solutions Entellisys 4.0 System User Manual - Manual (Page 220)

Alarms and events 220
A
C-7C55 Breaker Closing Spring Charged Others page 268
C-7C56 Breaker Primary Connected Others page 268
C-7C57 Breaker Primary Disconnected Others page 268
C-7C58 Breaker Secondary Connected Others page 268
C-7C59 Breaker Secondary Disconnected Others page 268
C-7C5A Breaker Tripped Trip page 268
C-7C5B Breaker Tripped Analog IOC Trip page 261
C-7C5C Test Mode Initiated From Test Kit Others page 262
C-7C5D Test Mode Ended From Test Kit Others page 262
C-7C5E Protection Suspended GF From Test Kit Others page 262
C-7C5F Protection Resumed GF From Test Kit Others page 262
C-7C61 Breaker Trip Backup ST Overcurrent Trip page 261
C-7C62 Breaker Trip Backup LT Overcurrent Trip page 261
C-7C63 Breaker Trip Backup Ground Fault Trip page 261
C-7C64 Breaker Trip Instantaneous Overcurrent Trip page 261
C-7C65 Breaker Topology State Change Others page 264
C-7C66 Alarm Pickup Undervoltage Others page 247
C-7C67 Alarm Undervoltage Alarm page 247
C-7C68 Alarm Dropout Undervoltage Others page 247
C-7C69 Pickup Undervoltage Others page 247
C-7C6A Breaker Trip Undervoltage Trip page 247
C-7C6B Dropout Undervoltage Others page 247
C-7C6C Attention Messngr Error 1 Replace ASAP Attention page 262
C-7C6D Attention Messngr Error 2 Replace ASAP Attention page 262
C-7C6E Attention Compartment ID Button Missing Attention page 262
C-7C6F Note Messngr Error 5 Others page 262
C-7C72 Fault Report Triggered By Command Others page 267
C-7C73 CPU Synch Clock Calibration OK others page 263
Table A-1 Sequence of events cause code cross reference index
Cause Event Text Category Page