3 usage – GE Industrial Solutions Entellisys 4.0 System User Manual User Manual
Page 57
Advertising
Overcurrent protection
57
5
Figure 5-1 Setting Delay Band for LT protection for Breaker 2
5.1.1.3 Usage
The LT Overcurrent Protection function picks up when the current value for any phase is above
the LT Pickup setting.
LT pickup, trip, and dropout events are recorded in the Entellisys Sequence of Events log.
Waveforms and fault reports are also captured on an LT trip event and can be viewed from the
Sequence of Events log.
Advertising