IDEC High Performance Series - Manual (Page 220)

Chapter 2
202
External Device Setup Manual
Word Device
Device Name Device Symbol Address Range Read
/Write Addres
s
Gradual
MICRO/I PLC
Input WI I
0 - 277
*1
*1. Address selection rule is as follows.
R 8
Output WO O
0 - 277 *1 R/W 8
Bit WB B
3000 - 99999
*2
*2. Address selection rule is as follows.
R/W 10
Timer (current value) TA T
3000 - 99999
*2 R 10
Counter (current value) CA C
3000 - 99999
*2 R 10
Timer (preset value) TP T
3000 - 99999
*2 R/W 10
Counter (preset value) CP C 3000 - 99999 *2 R/W 10
Integer N N
3000 - 99999
*2 *3
*3. System Area should assigned using a file number between 1 and 9 only. It will not work with file number 10 or above. You must construct an
area in the PLC-5 data table file that corresponds to the System Area Address selected by WindO/I-NV2.
R/W 10
BCD D D
3000 - 99999
*2 R/W 10
ASCII A A
3000 - 99999
*2 R/W 10