IDEC High Performance Series - Manual (Page 617)

599
1 Modbus
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Modb
us
External Device Setup Manual
1.1.2 Compatible PLCs
Modbus TCP Client cannot be used as Host I/F driver by MICRO/I equipped with the Ethernet interface.
Series
Name System
(CPU unit) Link Unit WindO/I-NV2, WindO/I-NV3 Settings
Interface Flow
Control Host I/F
Driver,
Communica-
tion Driver
Twido TWD LC*A 10DRF Not required
(connects to CPU unit
directly) RS422/485 2-wire Connection
Diagram 2(refer to P610) Hardware Modbus RTU,
Modbus ASCII
TWD LC*A 16DRF,
TWD LC*A 24DRF,
TWD LCA* 40DRF Not required
(connects to CPU unit
directly) RS422/485 2-wire Connection
Diagram 2(refer to P610)
TWD NAC 232D RS232C Connection Diagram 1
(refer to P607)
TWD NAC 485D RS422/485 2-wire Connection
Diagram 2 (refer to P610)
TWD NAC 485T RS422/485 2-wire Connection
Diagram 3(refer to P613)
Twido TWD LMDA 20DTK,
TWD LMDA 20DUK,
TWD LMDA 20DRT,
TWD LMDA 40DTK,
TWD LMDA 40DUK Not required
(connects to CPU
unit directly) RS422/485 2-wire Connection
Diagram 2(refer to P610) Hardware Modbus RTU,
Modbus ASCII
TWD NOZ 485D RS422/485 2-wire Connection
Diagram 2(refer to P610)
TWD NOZ 232D RS232C Connection Diagram 1
(refer to P607)
TWD NOZ 485T RS422/485 2-wire Connection
Diagram 3(refer to P613)
TWD XCP ODM
+TWD NAC 232D RS232C Connection Diagram 1
(refer to P607)
TWD XCP ODM
+TWD NAC 485D RS422/485 2-wire Connection
Diagram 2(refer to P610)
TWD XCP ODM
+TWD NAC 485T RS422/485 2-wire Connection
Diagram 3(refer to P613)
Momentum 171CCC96020 Not required
(connects to Ethernet
Port
*1
)
(Ethernet)
*1
*1. We tested with the PLC of these parts.
- Modbus TCP
Client