IDEC High Performance Series - Manual (Page 616)

Chapter 5
598
External Device Setup Manual
1 Modbus
Selecting Modbus RTU or Modbus TCP Client for the Host I/F Driver or Communication Driver allows the user to use the 1: N Com-
munication function.
• 1: N Communication function (Chapter 6 1: N Communication Function)
1.1 Connection Table
1.1.1 Compatible Protocols
Modbus TCP Client or Modbus TCP Server cannot be used as Host I/F driver by MICRO/I equipped with the Ethernet
interface.
Protocol WindO/I-NV2, WindO/I-NV3 Settings
Interface Flow Control Host I/F driver
Communication driver
Modbus RTU Master RS232C, RS422/485 2-wire, RS422/485 4-wire Hardware, None Modbus RTU
Modbus ASCII Master RS232C, RS422/485 2-wire, RS422/485 4-wire Hardware, None Modbus ASCII
Modbus TCP Client
Ethernet
*1
*1. Refer to Chapter 5 "1.6 Modbus TCP Server" on page 618.
- Modbus TCP Client
Modbus TCP Server
Ethernet
*1 - Modbus TCP Server