IDEC High Performance Series - Manual (Page 443)

425
16 YOKOGAWA
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Con
nection
to a PLC
External Device Setup Manual
16.4 Environment Settings
16.4.1 YOKOGAWA FA-M3 - Link Unit (F3LC11-1N, F3LC112N) to MICRO/I Setting
16.4.2 YOKOGAWA FA-M3 CPU (Programming tool port) to MICRO/I Setting
16.4.3 When connecting with the Yokogawa FA-M3 via Ethernet
Items Details
Interface Use the same
settings as for the MICRO/I.
RS232C, RS485 4-wire
CPU Number 01(0x01 -4(0x04)
Station Number 01(DEC)
Baud Rate (bps) 9600 or 19200
Data Bits 7 or 8
Parity Odd, Even or None
Stop Bits 1 or 2
Sum check Enable
Terminus character specification Enable
Protection function Disable
Items Details
Interface Use the same
settings as for the MICRO/I.
RS232C
Station Number 01(DEC)(Fixed)
Baud Rate (bps) 9600 or 19200
Data Bits 8 (Fixed)
Parity Even or None
Stop Bits 1 (Fixed)
Sum check Enable
Terminus character specification Enable
Item Setting
IP Address (MICRO/I) Set the IP address of MICRO/I in Communication Interface tab.
Subnet Mask Set the subnet mask of MICRO/I in Communication Interface tab.
Default Gateway Set the default gateway of MICRO/I in Communication Interface tab.
IP Address (PLC) Set the IP address of CPU Unit or Link Unit in Host I/F Network tab.
Port Number (PLC) Set the IP address of CPU Unit or Link Unit in Host I/F Network tab.
CPU Number Set the slot number of the CPU Unit to communicate with in Host I/F Network tab.