IDEC High Performance Series - Manual (Page 233)

215
4 Allen-Bradley
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Con
nection
to a PLC
External Device Setup Manual
4.7.2 Setting prosess
Adjust the settings below in WindO/I-NV2.
1. Select “Ethernet/IP(Logix Native Tag)” under the Protocol setting in the Select Host I/F Driver dialog box.
2. In the Host I/F Network tab in the Project Settings dialog box, set the IP address, port number, slot number,
and tag file to match the communicated PLC.
Use an L5K file or CSV file exported from RSLogix 5000.
- Change the port number as necessary.
- To create tag data base file (L5K), open a project as per RSLogix 5000, then select Save As on the File menu, and select
"RS Logix 5000 Import/Export File(*.L5K)" as the Save as type.