IDEC High Performance Series - Manual (Page 331)

313
9 JTEKT (Toyoda)
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Con
nection
to a PLC
External Device Setup Manual
Depending on the type of CPU operation mode of PC3J that you will be using, the there are limits to the areas that can be
used within the device ranges given above. Refer to the PLC manual for details.
Extended special register ES ES 0 - 7FF R/W
Extended setup value register H H 0 - 7FF R/W
Extended input WGX GX 0 - FFF R/W *3
Extended output WGY GY 0 - FFF R/W *3
Extended internal relay WGM GM 0 - FFF R/W *3
Extended Buffer register 0 EB0 EB 0 - 7FFF R/W *3
Extended Buffer register 1 EB1 EB 8000 - FFFF R/W *3
Extended Buffer register 2 EB2 EB 10000 - 17FFF R/W *3
Extended Buffer register 3 EB3 EB 18000 - 1FFFF R/W *3
*1. Parameter-set program No. in “Link parameter” is an objective of command processing.When the built-in standard link parameters are not set,
Probram1 is an objective of command processing.
*2. When CPU operation mode is division mode, File register is not available.
*3. These devices are available in the case of a PC3JG mode.
Word Device
Device Name Device Symbol Address Range Read
/Write Address
Gradual
MICRO/I PLC