External device setup manual – IDEC High Performance Series User Manual

Page 587

Advertising
background image

569

3 Wiring

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

DM L

ink

Communica

ti

on

External Device Setup Manual

3.2.2

2-wire

D-sub, 9P connector plug type

Terminal

- There is no pin number corresponding to TERM on the HG2G-S/-5S/-5F, HG3G/4G. When inserting a termination resis-

tor, use a communication switch. For the setting of the switch, refer to Chapter 1 "3 Important Points Regarding Wiring"
on page 19.

- HG2G-5F, HG3G/4G Series uses only RDA and RDB when using RS422/485 2-wire, you don’t need to connect SDA or

SDB.
If connecting COM1 on the HG2G-5F, HG3G/4G to the external device, do not insert terminating resistor to the external
device. If terminating resistor can not be removed, use COM2 on the HG2G-5F, HG3G/4G instead of COM1.

- Touch has no pin number corresponding to TERM. When a termination resistor is necessary, insert one with suitable resis-

tance value between pin 8 (RDA) and pin 9 (RDB).

Advertising
This manual is related to the following products: