IDEC High Performance Series - Manual (Page 304)

Chapter 2
286
External Device Setup Manual
Word Device
WindO/I-NV2 Device
Name R/W WindO/I-NV2 address PLC Device Name PLC address
Timer (Current Value) R TC0 - TC777 Timer
(Current Value)
0000 - 0777
Ext.Counter(Current Value) R ETC1000 - ETC1777 1000 - 1777
Counter (Current Value) R CC0 - CC777 Counter
(Current Value)
0000 - 0777
Ext.Counter (Current Value) R ECC1000 - ECC1777 1000 - 1777
Register (A) R/W RA0 - RA1576 Register a0000 - a1576
Ext.Register (A) R/W ERA2000 - ERA7576 a2000 - a7576
Register (B) R/W RB0 - RB1776 b0000 - b1776
Ext.Register (B) R/W ERB2000 - ERB3776 b2000 - b3776
Register (09) R/W R09_ 0 - R09_ 776 09000 - 09776
Register (19) R/W R19_ 0 - R19_ 776 19000 - 19776
Register (29) R/W R29_ 0 - R29_ 776 29000 - 29776
Register (39) R/W R39_ 0 - R39_ 776 39000 - 39776
Register (49) R/W R49_ 0 - R49_ 776 49000 - 49776
Register (59) R/W R59_ 0 - R59_ 776 59000 - 59776
Register (69) R/W R69_ 0 - R69_ 776 69000 - 69776
Register (79) R/W R79_ 0 - R79_ 776 79000 - 79776
Register (89) R/W R89_ 0 - R89_ 776 89000 - 89776
Register (99) R/W R99_ 0 - R99_ 776 99000 - 99776
Register (E) R/W RE0 - RE1776 E0000 - E1776
Ext.Register (E) R/W ERE2000 - ERE7776 E2000 - E7776
System Memory R S0 - S2176 System Memory #0000 - #2176
File Register (1) R/W F1_ 0 - F1_ 37776 File Register1 000000 - 037776
File Register (2) R/W F2_ 0 - F2_ 177776 File Register2 000000 - 177776
File Register (3) R/W F3_ 0 - F3_ 177776 File Register3 000000 - 177776
- Set all devices using octal.
- Confirm the PLC manuals as device or device address may not use according to PLC.
- R/W specifies Read and Write device. R specify Read only device.
- Word device address below “Register (A)” increase +2. (The other device increase +1.)
- Device address of WindO/I NV2 does not display as the number of figure used PLC.
Example: if you set to “Register 19005” using WindO/I NV2, it set to not “R19_ 005” but “R19_5”.