IDEC High Performance Series - Manual (Page 8)

vii
External Device Setup Manual
Abbreviations, Generic Terms, and Terminology Used in this Manual
Item Description
HG2G-S The name is short for MICRO/I HG2G-S*2**F-*.
HG2G-5S The name is short for MICRO/I HG2G-5ST22*F-*.
HG2G-5F The name is short for MICRO/I HG2G-5FT22TF-*.
HG3G The name is short for MICRO/I HG3G-*JT22*F-*.
HG4G The name is short for MICRO/I HG4G-CJT22*F-B.
HG1F The name is short for MICRO/I HG1F-SB22*F-*.
HG2F The name is short for MICRO/I HG2F-S**2V**.
HG2S The name is short for MICRO/I HG2S-S**2H-*.
HG3F The name is short for MICRO/I HG3F-FT22*F-*.
HG4F The name is short for MICRO/I HG4F-JT22*F-*.
HG2G-S/-5S/-5F The format used to refer to HG2G-S, HG2G-5S and HG2G-5F.
HG3G/4G The format used to refer to HG3G and HG4G.
HG1F/2F/2S/3F/4F The format used to refer to HG1F, HG2F, HG2S, HG3F and HG4F.
MICRO/I Generic term used to refer to the HG2G-S/-5S/-5F, HG3G/4G, HG1F/2F/2S/3F/4F.
SmartAXIS Another name for the SmartAXIS FT1A Series.
Touch The generic term for the SmartAXIS FT1A-M12RA-* and the FT1A-C12RA-*.
Pro The generic term for the FT1A Series that includes an LCD, excluding the Touch.
Lite The generic term for the FT1A Series that does not include an LCD, excluding the Touch.
External device
Generic term used to refer to a PLC or micro computer that is connected to and communicates
with the MICRO/I or Touch.
Device Address
Memory that is capable of storing values in unit of bits or words loaded on the MICRO/I or Touch
and external device.
System Area
Device area that is pre-allocated for exchanging screen management, error information, and clock
data between the MICRO/I or Touch and external device.
PLC Link Communication
A communication method that performs communication with the external device according to the
setting of the screen and without a program.
DM Link Communication
A communication method that reads to or writes from the MICRO/I or Touch device from a com-
puter or microcomputer board.
User Communication
A communication method which performs communication with external devices such as barcode
readers and inverters.
No External Devices
A method that is capable of operating the MICRO/I or the Touch independently without connect-
ing to external device.
O/I Link
A connection format that enables connections of up to 16 units of MICRO/I or Touch with high-
speed communication of 115200bps.
O/I Link Master The MICRO/I or Touch unit that is directly connected to external device on the O/I Link network.
O/I Link Slave
The MICRO/I or Touch units that are not directly connected to external device on the O/I Link net-
work.
WindO/I-NV2 Software for creating projects of the MICRO/I.
WindO/I-NV3 Software for creating projects of the Touch.
Project
Data including image data required for operating the MICRO/I or Touch, which is created with
WindO/I-NV2 or WindO/I-NV3 Software.