Replacing an interface module – Brocade FastIron SX Series Chassis Hardware Installation Guide User Manual
Page 126
Advertising
1
Switch Fabric module
FIGURE 45 Installing a switch fabric module in the FSX 1600
Replacing an interface module
You can remove an interface module and replace it with a new one while the chassis is powered on
and running.
NOTE
Interface modules are interchangeable among all FastIron X Series devices. However, if you install
them in a Brocade device other than a FastIron X Series device, the device and interface modules will
not function properly.
Replacing an interface module
124
Brocade FastIron SX Series Chassis Hardware Installation Guide
53-1003092-01
Advertising