Removing the slot panels – Brocade FastIron SX Series Chassis Hardware Installation Guide User Manual
Page 61
Advertising
Since the brackets are identical, you must rotate one bracket 90 degrees to fit on the opposite side from
the first bracket.
FIGURE 23 Installing the mounting brackets on an FSX 1600 chassis.
Repeat Step 2 through Step 6 of the “Installing the chassis in a rack” task to install the FSX 1600
chassis in the rack.
Removing the slot panels
The chassis ships with a slot panel installed in each empty module slot, ensuring proper airflow within
the chassis. If you plan to install a module in a particular slot, you must first remove the slot panel.
Removing the slot panels
Brocade FastIron SX Series Chassis Hardware Installation Guide
59
53-1003092-01
Advertising