Brocade FastIron SX Series Chassis Hardware Installation Guide User Manual

Page 25

Advertising
background image

You can install the following components in the slots:

Up to two management modules

Up to 16 single slot and up to 8 double slot interface modules

Up to eight AC or DC power supplies (four system (SYS) power supplies and four PoE power
supplies)

Before installing any modules or power supplies, you must remove the slot panel.

CAUTION

If you do not install a module in a slot, you must keep the slot panel in place. If you run the
chassis with an uncovered slot, the system will overheat.

The figure below identifies the slots where you can install modules and power supplies, and the
electrostatic discharge (ESD) connector, into which you can plug an ESD wrist strap to ground yourself
while handling and installing modules.

1

Interface slot 1

2

Interface slot 2

3

Interface slot 3

4

Interface slot 4

5

interface slot 5

6

Interface slot 6

7

Interface slot 7

8

Interface slot 8

9

Interface slot 9

10 Interface slot 10
11 Interface slot 11
12 Interface slot 12
13 Interface slot 13
14 Interface slot 14

Hardware features

Brocade FastIron SX Series Chassis Hardware Installation Guide

23

53-1003092-01

Advertising