Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 224)

210 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
Network LAN, WLAN-Mapping Commands
BR5181>admin(network.lan.wlan-mapping)>
Description
Displays the WLAN/Lan/Vlan Mapping submenu.
For an overview of the access point’s VLAN configuration options using the applet (GUI), see
“Configuring VLAN support” on page 95.
BR5181>admin(network.lan.wlan-mapping)> show
Description
Displays the VLAN list currently defined for the Mobility 5181 Access Point.. These parameters are
defined with the set command.
Syntax
Example
admin(network.lan.wlan-mapping)>show name
-----------------------------------------------------------------------------
Index VLAN ID VLAN Name
-----------------------------------------------------------------------------
show Displays the VLAN list currently defined for the Mobility 5181 Access Point.
set Sets the Mobility 5181 Access Point VLAN configuration.
create Creates a new Mobility 5181 Access Point VLAN.
edit Edits the properties of an existing Mobility 5181 Access Point VLAN.
delete Deletes a VLAN.
lan-map Maps Mobility 5181 Access Point existing WLANs to an enabled LAN.
vlan-map Maps Mobility 5181 Access Point existing WLANs to VLANs.
.. Moves to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI and exits the session.
show name Displays the existing list of VLAN names.
vlan-cfg Shows WLAN-VLAN mapping and VLAN configuration.
lan-wlan Displays a WLAN-LAN mapping summary.
wlan Displays the WLAN summary list.