Adaptive ap setup commands, Br5181>admin(system.aap-setup)>show – Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 311
Brocade Mobility 5181 Access Point Product Reference Guide
297
53-1002516-01
System Commands
8
Adaptive AP Setup Commands
BR5181>admin(system)>aap-setup
Description
Displays the Adaptive AP submenu.
For information on configuring adaptive AP using the applet (GUI), see
For an overview of adaptive AP functionality and its implications, see
BR5181>admin(system.aap-setup)>show
Description
Displays the access point’s Adaptive AP configuration.
Syntax
Example
admin(system.aap-setup)>show
Auto Discovery Mode
: disable
Controller Interface
: lan1
Controller Name
: greg
Static IP Port
: 24576
Static IP Address
:
IP Address 1
: 0.0.0.0
IP Address 2
: 0.0.0.0
IP Address 3
: 0.0.0.0
IP Address 4
: 0.0.0.0
IP Address 5
: 0.0.0.0
IP Address 6
: 0.0.0.0
IP Address 7
: 0.0.0.0
IP Address 8
: 0.0.0.0
IP Address 9
: 0.0.0.0
show
Displays Adaptive AP information.
set
Defines the Adaptive AP configuration.
delete
Deletes static controller address assignments.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the current configuration to the Mobility 5181 Access Point system flash.
quit
Quits the CLI and exits the current session.
show
Displays the access point’s Adaptive AP configuration.